Menü
Die kombinierte Platzierung mit zwei Armen ermöglicht die schnellste Platzierungsgeschwindigkeit von 84.000 CPH (unter unseren optimalen Bedingungen).
Das Dual-Arm-Dual-Drive-System sorgt für Präzision und Konsistenz bei hohen Geschwindigkeiten.
Nozzle center-to-center distance: 21.5mm
Nozzle vertical stroke: 20mm
Component mounting height: 10mm
Open-loop stepper motor with swing-arm time-sharing motion
Drei-Führungsschiene mit Leitspindel
Dual linear guides with lead screw
Six synchronized high-speed recognition cameras
Ausgestattet mit sechs 400K-Pixel-Kamerasets und einer 3MP Hochpräzisionskamera
Mit einer 400.000-Pixel-Überwachungskamera und einer Streulichtquelle.
Guide Rail
The feeder air holes use pressure strips and sealing rings, with 10mm solenoid valves.
Number of feeders: 60 units.
Mechanismus der oberen Platte
Optional simple support.
Übertragung Plattform
Double micro-cylinder clamping plate, 4MM baffle cylinder.
Feeder-Komponente
The X-axis guide rails are installed at 90 degrees on both sides.
Fuß/Basis
Diameter: 12.5c
The WYSIWYG PCB simulation window, combined with zoom and pan operations, allows users to quickly locate components and compare them with actual objects to troubleshoot errors.
The material preparation interface provides visualization of material level distribution and installation, making it easier for users to understand the status of material readiness.
The output point interface supports manual troubleshooting of device hardware faults, improving the efficiency of fault resolution.
The detailed component library design enhances programming efficiency, enabling users to complete design and development tasks more effectively.
| Modell | A6L Parameters |
|---|---|
| Feeder Quantity | 60 (Front 26 / Rear 34) |
| Mounting Head Quantity | 4 heads (no need to change nozzles) |
| Durchschnittliche Leistung | 600W |
| Produkt Gewicht | 600KG |
| Abmessungen | 1395x1180x1376mm |
| Maximum Circuit Area | 650x370mm |
| Maximum Travel Range (XY Axis) | 700x619mm |
| 2D Motion Range | 32mm |
| XY Axis Driver | HIWIN high-precision heavy-duty linear guide |
| Visual Display | Two 17-inch industrial monitors (4:3 aspect ratio, resolution: 1024×768) |
| Maximum Travel Range (Z Axis) | 20mm |
| XY Transmission Mode | HIWIN high-precision heavy load linear guide |
| Belt Feeder | 8, 12, 16, 24, 32mm feeders, vibration feeders (optional electric feeders) |
| Antrieb Motor | Panasonic servo motor (Japan) |
| Maximale Höhe der Komponente | 10mm |
| Maximum Processing Capacity | 12000 Pcs/h (with vision activated) |
| PCB Loading Method | Three-stage board loading (waiting for board in, waiting for board out), flexible in-out method (left-right, right-left, same left, same right) with automatic docking |
| Applicable Mounting Range | Kompatibel mit 0201, 0402, 0603, 0805, 1206, LED-Perlen, Dioden, Transistoren, SOT, 40*40mm Fine Pitch ICs (QFN, SSOP, QFP, BGA, etc.) |
| Düse Vakuumquelle | High-speed on/off vacuum generator with vacuum breakage |
SMT-Maschine Lösung aus einer Hand
Rm3A08 (4. Stock) Block D, Huashengtai Technology Park, No.36 Hangkong Road, Baoan District, Shenzhen City, China
© 2025 Alle Rechte vorbehalten.