Product Details

 Home/ Product Center / SMT Peripheral Equipment

Send an inquiry

Table of Contents

Categories

  1. Auto Insertion Machine
  2. SMT Feeder Machine​
  3. SMT Peripheral Equipment
  4. PCBA and PCB Cleaning Machine
  5. PCB Separator Machine
  6. Wire Bonding and Die Bonder
  7. PCB Board Handing System
  8. lon Beam Equipment
  9. ESD Anti-static Product

Recent Post

lead-free-nitrogen-reflow-sodering-machine

Lead-free Wave Soldering Machine

This series lead-free wave solder machine includes titanium fingers conveyor resistant to high temperatures, can handle all high-volume manufacturing requirements. Backed by our 2 years warranty and high quality after sales service. It's the safe choice for customer requiring no compromise quality, reliability, and exceptional value for cost.
Send an inquiry

Lead-free Wave Soldering Machine HWU-350/450

Description

We have a full range of wave solder machine, nitrogen is an option, please contact us to discuss your individual requirement.

Features
  • The guide rail can bear up to 80kg, new heavy finger, anti-shaking, ball chain structure.
  • Low dross oxidization, new wave nozzle design, the pot has automatic in, out, lifting function.
  • Selective area spray, flux can save up to 70%.
  • Free combination of hot air and infrared preheating module.
  • Segmented transportation rail design, 80kg rail transportation capacity, the maximum width of PCB can be increased to 610mm.
  • With advance temperature controller, counter, timer, and speed controller etc., provide a stable performance of the machine.
  • Solder pot we provide titanium and cast iron for option.
  • Light and sound alarm for overheating and emergency stop.
  • The conveyor system is equipped with overload protection.
Technical Parameters
Lead-free Wave Soldering Machine HWU-350/450

Model

HWU-350

HWU-450

Machine parameter

Dimension (L x W x H)mm

4500x1500x1800mm

Power supply

3 phase, 380V 50/60HZ

General power

25KW

Startup power

15KW

Normal power consumption

Approx.3-8KW

Preheat system parameters

Preheat mode

Hot air

Speed control

stepless frequency

Preheat zone No.

4

Preheat length

1800mm

Preheat temp

Room temp – 250℃

Soldering system

Solder pot-driven mode

Mechanical pump

Solder pot material

titanium

Heater power

Case iron:14.5KW; titanium:12KW

Case iron: 14.5KW; titanium:15KW

Pot volume

500-550kg

Temp control mode

PID + SSR

Warm-up time

About 90Min (set 250℃)

Conveyor system

PCB width

50-350mm

50-450mm

Component height

top:120mm, bottom:25±5mm

Conveyor speed

0-1800mm.min

Conveyor height

750±20mm (option: 900±20mm)

Conveyor type

Titanium finger

Solder angle

3-7°

PCB direction

L to R or R to L

Conveyor motor power

120V 3P 220VAC

N2 system (option)

Nitrogen consumption

15m3/h, <1000PPM

Nitrogen supply

0.5-0.8Kpa

Others

Flux auto feeding

Yes

Flux flow

20-100ml/min

Spray pressure

0.25-0.4MPa

Cooling (option)

2HP 2P 220VAC

Center support

Option

Get Your Quote

What delivery did you have in mind? Fill in the details below to receive a quote.
Whatsapp
Envelope

SMT Machine One-stop Solution

Products
Quick Links
Get In Touch

Rm3A08 (4th Floor) Block D, Huashengtai Technology Park, No.36 Hangkong Road, Baoan District, Shenzhen City, China

© 2025 All Rights Reserved.