商品詳細

 家/ 製品センター / PCB保管用ESDマガジンラック

お問い合わせを送信

目次

カテゴリー

  1. 自動挿入機
  2. SMTフィーダマシン
  3. SMT周辺機器
  4. PCBAおよびPCBクリーニングマシン
  5. PCB分離機
  6. ワイヤーボンディングとダイボンダー
  7. PCB基板ハンドリングシステム
  8. ロンビーム装置
  9. ESD帯電防止製品

最近の投稿

ESD SMTダブルスプライステープ
ESD SMTダブルスプライステープ

ESD SMTダブルスプライステープ

This is one of the most economically ESD SMT Double Splice Tape, which guarantee perfect and flexible joints in all kinds of paper carrier tape. Joining is accomplished without any tools or fixtures, with precise pitch spacing, using convenient, pre-cut lengths of tape. It is made of 2 tapes and release paper, and the tape is made by the material with superior adhesion.
お問い合わせを送信

ESD SMTダブルスプライステープ

説明

ESD SMT Double Splice Tape Advantages

This is one of the most economically ESD SMT Double Splice Tape, which guarantee perfect and flexible joints in all kinds of paper carrier tape. Joining is accomplished without any tools or fixtures, with precise pitch spacing, using convenient, pre-cut lengths of tape. It is made of 2 tapes and release paper, and the tape is made by the material with superior adhesion.

Suitable for most pick and place machines in the market, such as JUKI, YAMAHA, Panasonic, FUJI, SAMSUNG, SIMENS, HITACHI, etc.

特徴
  • A fast, precise way to connect SMT component reels.
  • By the locating points of material receiving, simple operation, feed efficiency.
  • Superior in adhesion, stretch resistance, strengthened fixation, easy peeling without glue, with various specifications.
  • Increase Pick & Place Machine output by 5%-30%.
  • Use all components on the carrier tape.
  • Reduce reel changed downtime.
  • Decrease abrasion by reducing the need to reload the feeder.
  • High-cost performance of products.
  • Series double splice tape is used for jointing carrier tapes in the SMT process.
  • Double embossed dots designed for easy alignment, one piece for one jointing. Easy operation, no need to use auxiliary tools.
  • Available for all SMT machines except sensitive machine.
仕様
  • Available size: 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, etc. carrier tapes.
  • Splice products available color: yellow, blue, black for selection.
  • Length: 40mm
  • Package: 500pcs or 250pcs/bag
Operation Steps
  • On the SMT component reel, cut flush along the center of the hole.
  • Remove the covered base paper.
  • Position the film by embedding the raised dots in the two connector holes, and pressure bond on top of the film.
  • After folding along the center of the base sheet and bonding the other side of the element tape, clear the substrate and re-press the film underneath.

ESD SMTダブルスプライステープ

お見積もり

どのような配送をお考えですか？お見積もりをご希望の方は、下記に詳細をご記入ください。
ワッツアップ
封筒

SMTマシンワンストップソリューション

製品紹介
クイックリンク
連絡先

中国深圳市宝安区杭孔路36号華盛台科技園D棟3A08室（4階

© 2025 All Rights Reserved.